24.00 fl oz
SKU / UPC: 047113609027
Contents: Clear Care One Bottle Cleaning and Disinfecting Solution is a Sterile Solution Containing Micro-Filtered Hydrogen Peroxide (3%), Sodium Chloride (0.79%), Stabilized with Phosphonic Acid, a Phosphate Buffered System, and Pluronic 17R4 (a Cleaning Agent).
Watch the bubbles go to work! To ensure proper disinfection of your lenses you must follow the instructions completely. Do not skip any steps. Always wash and rinse your hands before handling your lenses. See package insert for special RGP instructions. 1. Remove and place each lens into the appropriate marked L/R domed lens holder. Rinse with Clear Care for 5 seconds. 2. Fill the lens case to fill line with Clear Care and place the lens holder in the case. 3. Tighten the cap and store lenses for at least 6 hours or overnight. Do not shake the case. Your lenses are ready to wear after soaking for 6 hours. No final rinse with saline is necessary. Store at room temperature.
CIBA Vision Corporation
Duluth, GA 30097
Do not use flat lens case. Clear Care only works with the special lens case provided. Do not remove lenses from case until at least 6 hours later. The solution needs time to neutralize. Do not rinse lenses with Clear Care prior to inserting lenses into your eyes. If you want to rinse lenses, use a sterile saline. Do not squirt Clear Care directly into your eyes. There are no known contraindications for use of Clear Care. If you are allergic to any ingredient in this solution, do not use. Your eye care professional may recommend additional products or procedures to care for your lenses based on individual tear chemistry and lens wearing schedule. Always follow your eye care professional's instructions. See package insert printed on inside of carton for detailed directions and important safety and other information. Keep out of reach of children. Tamper Resistant: Do not use if Safety Seal around the bottle cap is broken or missing or if the carton is opened or damaged.